SOLIDSKIM
White Cement Based Smooth,Water based Wall Putty
BENEFITS
SOLIDSKIM
White Cement Based Smooth, Water-Based Wall Putty
> Synthetically bound ready to use compound for inert
filler material.
> Only precise quantity of water to be added.
> Ensures use on all common types of building
interiors.
> Excellent adhesion.
> Excellent thixotropicness.
> Due to good bonding property it is more durable.
> Excellent whiteness, so gives good exposure.
> Excellent finishing and easy to apply.
> Completely applied putty will not allow water
penetration.
> Provides smooth, silky and featheredged finish to
substrate to facilitate better texture of paint.
> Application of SOLIDSKIM with workmanship makes
exterior and interior look aesthetic.
> No curing is required.
> Prevents growth of algae and fungi on walls.
> It is in dry powder form and does not produce any
kind of filth smell at the time of application.
DESCRIPTION
SOLIDSKIM is a white cement based, water resistant,
which requires precise quantity of water to make a putty
as an inert material for substrate. This is especially used
to seal the pin holes and the blow holes getting
exposed on concrete / plastered surfaces. Also it gives
more adhesion strength and increases the life of paints.
USES
SOLIDSKIM is suitable for:
> Use on both precast and concrete structures like
sand cement plaster, level brick work and block
work, exposed concrete.
> Plywood.
> AC sheets.
> Gypsum boards.
> Can be applied for redecoration on firm, old
painted areas.
PACKING & COVERAGE
SOLIDSKIM is available in 20 kg and 25 kg HDPE bag.
SOLIDSKIM has a coverage of 0.7 ~ 0.8 m² / kg when
applied at a thickness of 1 mm.
SPECIFICATION
SOLIDSKIM is a white cement based, water resistant
requiring precise quantity of water for substrates and is
an inert filler material available in 20 and 25 kg plastic
ined sacks having a coverage of 0.7 ~ 0.8 m² / kg at 1
mm thickness, used strictly in accordance with the
instruction of SOLID.
SHELF LIFE & STORAGE
SOLIDSKIM will have a shelf life of 12 months in
unopened container when kept in dry conditions at a
temperature between 5 ~ 45 °C. Storage at higher
temperature or high humidity may reduce shelf life.
HEALTH & SAFETY
SOLIDSKIM is non toxic and non flammable. However,
splashes on the skin should be washed well with water
and if contact with eye occurs, wash well with water and
seek medical advice (for more detail please refer
MSDS)
HOW TO USE
Surface Preparartion : Make sure that the surface is
absolutely clean, dry and free from dust, grease and
foreign materials. There should be a time gap of atleast
10 days before SOLIDSKIM application is done on
newly plastered surfaces. Ensure that the surface is fairly
even. If concrete surface is to be painted, it shall be
washed with a water jet and all loose concrete should
be getting removed and all pin holes and blow holes
should get opened.
Application : SOLIDSKIM is ready to use material.
Water Resistant Skim Coat + 300 ~ 320 gms of water for
1kg powder of SOLIDSKIM / tertene. Apply the
prepared material with putty knife from bottom to top
by ensuring complete filling of holes with putty material
and feather-edged finish. The coating should be about 1
mm thick. Second coat of SOLIDSKIM depends up on
the exposed surface after first coat (generally both coat
do not exceed 2 mm) and leave the surface to dry
overnight. The drying time of each coat should be 3
hours, but will vary from surface to surface (depending
upon
atmospheric condition).
Finishing : Make sure that the material has fully covered
the substrate and dried. If putty applied surface is
rough, surface should be made smooth by rubbing
suitable emery paper on it. Ensure that the paper is fine
and does not cause scratches on the SOLIDSKIM
coating area. The SOLIDSKIM area is now ready for
painting.
Painting : The smooth surface finished with
SOLIDSKIM does not require any putty or primer
before paint application. Just apply any paint as per the
manufacturer’s standard specification. Intact painting
can commence withing a few hours of SOLIDSKIM.
QUALITY ASSURANCE
SOLID manufactures the entire range of construction
chemical under compliance of SIRIM and other
international standards (ASTM, BS, GBI, LEED).
TECHNICAL SERVICES
While new advance and changes will take place but one
thing will never change is quality and meeting special
needs of our customers. Our technical personnel and
experts are available to provide additional information
and technical assistance. We are eager to work with you
in development of new product and resolve your
problem.
Disclaimer : The information provided in the data sheets is based on both current development of work and years of field experience. Efforts are made