{"product_id":"epoxy-injection-mortar-gu-2000","title":"epoxy injection mortar- GU-2000","description":"\u003cp\u003eDESCRIPTION. - Quick setting and curing time. - Easy and quick use. - Suitable for dry fastening. - Suitable for wall and overhead application. - Reduced anchor spacing and edge distance. - Variety of cartridge sizes are available. - Partially used cartridges can re-used by replacing \u003cbr\u003ethe mixer nozzle. - Good resistance to acid and alkali - High durability - Can be used with wet concrete (Reduction of \u003cbr\u003erecommended loads of about 20%-40%). \u003cbr\u003eGU-2000 \u003cbr\u003eSTATIC MIXER #817 \u003cbr\u003eGOOD USE HARDWARE CO., LTD. \u003cbr\u003eGU-2000 P1\/7 \u003cbr\u003eVINYLESTER INJECTION MORTAR \u003cbr\u003eDate of Issue: December 25, 2020 \u003cbr\u003eGU-2000 \u003cbr\u003eTECHNICAL DATA SHEET \u003cbr\u003eATTENTION - Do not install anchors when substrate temperature is less than 0℃. - Do not install anchors when the GU-2000 mortar temperature is less than 15℃. - AT temperatures below 15℃ GU-2000 should be warmed or stored in temperatures \u003cbr\u003eof 20-25℃ for 24hours prior to use to improve product flow and cure. - If the gelling time expires, please use a new static mixer. - Do not cut or shorten nozzles. - If the cartridge is not finished, please clean the opening, then put the plug back and cap tightly. - It can be used again in the future by replacing the static mixer. - Please ensure hole is properly cleaned. Hole may be damp but must be free from water. - Do not dilute mortar with any solvents and\/or other chemicals. - Not suitable for use in diamond cored holes without roughening. - Please ensure spiral mixer in nozzles. - Do not install into uncured concrete. - Please use Good Use nozzles, other nozzles may cause ineffective mixing \u003cbr\u003eand reduce the properties of the mortar. \u003cbr\u003eSTORAGE\/SHELF LIFE - 18 months if stored in perfect condition. - Avoid direct sunlight. - This product should be stored between +5℃~+25℃ \u003cbr\u003ePACKAGING INFORMATION - Each cartridge is packed in plastic bag with 1 \u003cbr\u003estatic mixer #817\u003c\/p\u003e","brand":"Etcetera Maldives - Tin :1104460GST501","offers":[{"title":"Default Title","offer_id":45442280783895,"sku":null,"price":460.0,"currency_code":"MVR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0267\/8842\/9847\/files\/xcx.jpg?v=1787754509","url":"https:\/\/etceteramaldives.com\/products\/epoxy-injection-mortar-gu-2000","provider":"Etcetera Maldives - Tin :1104460GST501","version":"1.0","type":"link"}